Product ID:FLAT HOUSE PAINT-DEEPTONE BASE, 50-54
MSDS Date:06/16/1992
FSC:8010
NIIN:00N034404
MSDS Number: BPXQM

PPG INDUSTRIES INC

4325 ROSANNA DRIVE
ALLISON PARK, PA 15101
US

Emergency Phone: 412-492-5555;304-843-1300

Info Phone: 216-572-6111;800-441-9695

Cage: 47695

PPG INDUSTRIES INC

PITTSBURGH, PA 15272 US

Telephone: 1-800-245-2974 (CAL HYPO)

Cage: 47695

HYDROTREATED HEAVY NAPHTHA (PETROLEUM)

CAS: 64742-48-9

Fraction By Weight: 15-20%

FILM FORMERS, RESINS, AND ADDITIVES

Fraction By Weight: 20-25%

SILICA, CRYSTALLINE - QUARTZ

CAS: 14808-60-7

RTECS: VV7330000

Fraction By Weight: 15-20%

OSHA PEL SEE TABLE Z3

ACGIH TLV: 0.1 MG/M3 RDUST;9293

SILICA, CRYSTALLINE - CRISTOBALITE

CAS: 14464-46-1

RTECS: VV7325000

Fraction By Weight: 5-10%

OSHA PEL SEE TABLE Z3

ACGIH TLV: 0.05 MG/M3 RDUST9293

AVOID LONG TERM & RPTD CONT.PROD CONTAINS

RTECS: 9999999ZZ

DIOXIDE DUST IN LONG-TERM STUDY DEVELOPED LUNG

RTECS: 9999999ZZ

NO INCR RISK OF CANCER FROM EXPOS. POTNTL FOR INHAL

RTECS: 9999999ZZ

LIMITED. SINCE OVEREXP ARE NOT EXPECTED, THERE IS

RTECS: 9999999ZZ

CRYSTALLINE SILICA/QUARTZ WHICH IARC ASSOC W/AN

RTECS: 9999999ZZ

CRYSTALLINE SILICA/QUARTZ MAY ALSO LEAD TO DISABLING

RTECS: 9999999ZZ

EXCESSIVE AMTS OF SILICA DUST.APPLIC OF PROD IS NOT

RTECS: 9999999ZZ

SO THE POTENTIAL HAZARD FOR HUMANS IS LIMITED.

RTECS: 9999999ZZ

DETERMINE TYPE OF AIRBORNE CONTAMINANTS AGAINST

RTECS: 9999999ZZ

LEL IN FIRE & EXPLO HAZ BELOW STATED LIMIT, & TO

RTECS: 9999999ZZ

COATED WITH THIS PRODUCT.

RTECS: 9999999ZZ

TITANIUM OXIDE; (TITANIUM DIOXIDE)

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 2-5%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293

SILICA, CRYSTALLINE - FUSED; (SILICA, AMORPHOUS-FUSED)

CAS: 60676-86-0

RTECS: VV7328000

Fraction By Weight: 10-15%

OSHA PEL SEE TABLE Z3

ACGIH TLV: 0.1 MG/M3 RDUST;9293

DIATOMACEOUS EARTH; (SILICA, AMORPHOUS-DIATOMACEOUS EARTH)

CAS: 68855-54-9

Fraction By Weight: 30-35%

OSHA PEL 6 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST

SOLVENT NAPHTHA PETROLEUM, MEDIUM ALIPHATIC

CAS: 64742-88-7

Fraction By Weight: 5-10%

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:ACUTE:INGEST: HARMFUL/FATAL IF
SWALLOWED. EYE:CAUSES EYE IRRIT.SKIN: MAY CAUSE MOD SKIN IRRIT.
INHAL: VAP & SPRAY MIST MAY BE HARMFUL IF INHALED.VAPS IRRIT EYES,
NOSE,& THROAT. SANDING & GRINDING DUST S MAY BE HARMFUL IF
INHALED.RPTD EXPOS TO HIGH VAP CONC MAY CAUSE IRRIT OF RESP SYS &
PERM BRAIN & NERV SYS DMG. (ING 9)
Explanation of Carcinogenicity:SILICA, CRYSTALLINE (QUARTZ),
(CRISTOBALITE): ANTICIPATED TO BE A CARCINOGEN (NTP), GROUP 2A
(IARC).
Effects of Overexposure:EYE WATERING, HEADACHES, NAUSEA, DIZZ, AND LOSS
OF COORDINATION ARE INDICATIONS THAT SOLVENT LEVELS ARE TOO HIGH.
REDNESS, ITCHING, BURNING SENSATION AND VISUAL DISTURBANCES MAY
INDICATE EXCESSIVE EYE CONTACT. DRYNESS, ITCHING, CRACKING,
BURNING, REDNESS, AND SWELLING ARE CONDITIONS ASSOCIATED
W/EXCESSIVE SKIN CONT.
Medical Cond Aggravated by Exposure:NOT APPLICABLE.

First Aid:INGESTION: DO NOT INDUCE VOMITING. EYE: FLUSH EYES
IMMEDIATELY WITH PLENTY OF WATER FOR AT LEAST 15 MINUTES. SKIN:
FLUSH IMMEDIATELY WITH PLENTY OF WATER FOLLOWED BY WASHING WITH
SOAP AND WATER. INHAL ATION: REMOVE TO FRESH AIR. APPLY ARTIFICIAL
RESPIRATION AND OTHER SUPPORTIVE MEASURES AS REQUIRED. OTHER: IF
INGEST, ANY TYPE OF OVEREXP/SYMP OF OVEREXP OCCUR DURING/FOLLOWING
USE OF PROD, (SUPDAT)

Flash Point Method:PMCC
Flash Point:116F,47C
Lower Limits:0.9%
Extinguishing Media:USE NFPA CLASS B EXTING (CARBON DIOXIDE, DRY
CHEM/UNIVERSAL AQUEOUS FILM FORMING FOAM) DESIGNED TO EXTING NFPA
(SUPDAT)
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT
EQUIP.H*2O SPRAY MAY BE INEFT.H*2O SPRAY MAY BE USED TO COOL CLSD
CNTNRS TO PVNT PRESS BUILD-UP & POSS (SUPDAT)
Unusual Fire/Explosion Hazard:KEEP CNTNRS TIGHTLY CLSD.ISOLATE FROM
HEAT,ELEC EQUIP,SPARKS,& OPEN FLAMES.CLSD CNTNRS MAY EXPLO WHEN
EXPOS TO EXTREME HEAT.DO NOT APPLY ON HOT SURFS. (SUPDAT)

Spill Release Procedures:PROVIDE MAXIMUM VENT. ONLY PERS EQUIPPED WITH
PROPER RESP AND SKIN AND EYE PROTECTION SHOULD BE PERMITTED IN
AREA. REMOVE ALL SOURCES OF IGNITION. TAKE UP SPILLED MATERIAL WITH
SAWDUST, VERMICULITE, O R OTHER ABSORB MATL & PLACE INTO CNTNRSFOR
DISP.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:DO NOT STORE ABOVE 120F. STORE LARGE
QUANTITIES IN BUILDINGS DESIGNED AND PROTECTED FOR STORAGE OF NFPA
CLASS II COMBUSTIBLE LIQUIDS.
Other Precautions:IF MATL IS PART OF MULTIPLE COMPONENT COATING SYS,
READ MSDS FOR OTHER COMPONENT/COMPONENTS BEFORE BLENDING AS RSLTG
MIX MAY HAVE HAZ OF ALL OF ITS PARTS.CNTNRS SHOULD BE GROUNDED WHEN
POURING.AVOID F REE FALL OF LIQ IN EXCESS OF FEW INCHES.

Respiratory Protection:OVEREXP TO VAPS MAY BE PVNTD BY ENSURING VENT
CONTROLS, VAP EXHAUST/FRESH AIR ENTRY. NIOSH/MSHA APPRVD (TC-23C)
AIR PURIFYING/AIR SUPPLIED (TC-19C) RESP MAY ALSO REDUCE EXPOS.
READ RESP MFR'S INSTRUCT IONS & LITERATURE CAREFULLY TO (ING 17)
Ventilation:PROVIDE GEN DILUTION/LOC EXHST VENT IN VOL & PATTERN TO
KEEP CONC OF INGS BELOW LOWEST SUGGESTED EXPOS LIMITS, (ING 18)
Protective Gloves:NITRILE RUB OR NEOPRENE RUB GLOVES.
Eye Protection:CHEM WORK GOG/FULL LGTH FACESHLD .
Other Protective Equipment:WEAR PROTECTIVE CLOTHING, INCLUDING
IMPERMEABLE APRON CONSTRUCTED OF NITRILE RUBBER OR NEOPRENE RUBBER.
Work Hygienic Practices:CLEAN OR DISCARD CONTAMINATED CLOTHING AND
SHOES.
Supplemental Safety and Health
EXTING MEDIA:CLASS II COMBUST LIQ FIRES.FIRE FIGHT PROC:
AUTOIGNIT/EXPLO WHEN EXPOS TO EXTREME HEAT.IF H*2O IS USED,FOG NOZ
ARE PREF.EXPLO HAZ:TOX GASES MAY FORM WHEN PROD IS CONTACTED BY
FLAME/HOT SU RFS.HAZ DECOMP PRODS:INCL:CARBON MONOXIDE.FIRST AID
PROC:CONT POIS CNTRL CNTR,EMER ROOM/PHYS IMMED;HAVE MSDS INFO
AVAIL.

HCC:F4
Boiling Pt:B.P. Text:>212F,>100C
Vapor Pres:1.2
Vapor Density:HVR/AIR
Spec Gravity:1.26
Evaporation Rate & Reference:14 (BUTYL ACETATE=100)
Solubility in Water:0%
Appearance and Odor:VISCOUS LIQUID WITH AN ODOR CHARACTERISTIC OF SOLV
LISTED IN INGREDS SECTION
Percent Volatiles by Volume:48.7

Stability Indicator/Materials to Avoid:YES
STRONG ALKALIES, STRONG MINERAL ACIDS, OR STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:MAY PRDCE HAZ DECOMP PRODS WHEN
HEATED. WELDING, BRAZING/FLAME-CUTTING ON SURFS COATED W/PROD MAY
PRDCE FUMES (SUPDAT)

Waste Disposal Methods:WASTE MATERIAL MUST BE DISPOSED OF IN ACCORDANCE
WITH FEDERAL, STATE, PROVINCIAL, AND LOCAL ENVIRONMENTAL CONTROL
REGULATIONS. EMPTY CONTAINERS SHOULD BE RECYCLED OR DISPOSED OF
THROUGH AN APPROVED WA STE MANAGEMENT FACILITY.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.